TISEC delivers Practical Pattern Recognition Workshop for NDT in Montreal, Canada, June 28-30, 2010
TISEC's ASTIA™ Above-ground Storage Tank Inspection and Assessment goes live, March 2010.
Level III UT Training course completed in State College, PA, March 2010.
WINS presents talk on ultrasonic guided wave potential towards helicopter maintenance to Indian Air force, February 2010.
WINS funded by Transportation Research Board to develop Bridge Cable Inspection Technology, February 2010.
Watch video of Wireless Acoustic Emission Sensor Network for Bridge Structural Health Monitoring.
2010 NDT Training Course Schedule is available now!
New look of TISEC's Super ICEPak® web site, November 2009.
Download and try out TISEC's Super ICEPak® today, contact TISEC for a trial key, November 2009.
New Brunswick DOT has awarded TISEC to inspect LRUT bridge cables on 3 cable-stay bridges using new MsS system, November 2009.
WavesInSolids acquires state-of-the-art equipment for enhanced Guided Wave Inspection Services for Pipelines and Bridge Cables, November 2009.
WavesInSolids delivers Acoustic Emission Level III Training Course in Kuala Lumpur, Malaysia, October 5-9, 2009
WavesInSolids is awarded contract with U.S. Department of Energy for developing inspection technology for health monitoring of coal power plant components, August 2009
WavesInSolids presents a paper at NYC Bridge Conference titled "Structural health monitoring using wireless acoustic emission sensor network" in August, 2009
WavesInSolids is awarded contract with NSF for developing inspection technology for Steel Piles, July 2009
WavesInSolids presents "Acoustic emission input to inspection- based bridge maintenance" at theInternational Conference on Fracture & Fatigue in July, 2009
Bridge Cable Inspection
WavesInSolids specializes in the nondestructive inspection of suspender cables and ropes in cable-stay and suspension bridges, using long range ultrasound (LRUT) and Acoustic Emission (AE) technology. The LRUT technology is applicable for cables up to 4" in diameter and AE technology is applied where LRUT may not be applicable.
Long range ultrasound is used as a screening tool for oil and natural gas pipelines, bridge pile, and railroad track. The technology provides real-time feedback on structural condition without the need for direct access to the area of interest. Cable inspection typically takes about 20 minutes. Click here to obtain our CableUT brochure
Acoustic Emission technology has been utilized to provide risk-based inspection and maintenance for fracture critical members in infrastructure such as bridges and storage tanks. The technology provides real-time feedback on structural condition without the need for direct access to the area of interest. Click here to obtain our CableAE brochure.
Our American Society for Nondestructive Testing (ASNT) certified inspectors have complementary training in fall protection, rope access, highway safety, railway safety, and confined space safety.